Quantcast
Channel: Recent Discussions — Polk Audio Forum
Viewing all 44559 articles
Browse latest View live

FS: Polk LS 90 Oak with Upgraded X-overs

$
0
0
Purchased them off the forum here...http://forum.polkaudio.com/discussion/comment/2179332#Comment_2179332

I like them a lot. If the wife would have let me run them with the grill covers off, they would still be in my main rig. They sound outstanding, open, dynamic etc...with solid bass with the grill covers off. Putting them back on mellows the sound slightly, but IMO puts a veil over the sound.

They are in beautiful condition. Upgraded crossovers according to Keith (see linked thread).

I would like to keep them for the man-room to swap out with the SDA2a's, but the only way I could get my new PSB's is if I promised the wife I would sell the ones I had, so here they are.

Local pickup only, or I could potentially drive a bit to meet. Paypal or cash only. I reserve the right of sale to a member in good standing.

Ask any questions.

$350

Thanks,
Paul

Got me a Velo F1200B sub

$
0
0
Courtesy of my cousin. I already ordered a surround kit as the foam surround is failing. I'm expecting it to sound quite good, although I doubt it will outshine my PSA sub. It may find its way into the FS section soon.

Polk Ls70 speakers in quad

$
0
0
Selling for $399 8/10 condition. Local only
jc5i4jfse2mj.jpg
8xbscoe374ct.jpg
nd71v7pfjtps.jpg
r88gzehm8v86.jpg
l89pw2ak148l.jpg
9npbn2sfqtij.jpg

SB1 and S2 constantly uploading data

$
0
0
Hi Folks,
Did those of you who own SB1 (named Polk TV below) or S2 (Polk St) notice that they upload considerable amounts of data every day? I don't use them anymore for streaming music, so no downloads, but the two speakers uploaded total of 15 GB of data in two months time. See the images below. Please let me know if anyone else have seen similar behavior. I have not been able to find any explanation on the internet or from customer service.

0pa2kdq2mly4.png
5zxhijavlt76.png

SDA SRS 2 - Fully upgraded - Michigan

$
0
0
Selling my fully upgraded Polk SDA SRS 2 speakers in excellent condition, overall 8 out of 10. These were my babies, but I'm moving and can't take them with me.

Pick up in Lansing, Michigan.

Upgrades:
-fully recapped crossovers with Dayton 5% in the sub and low pass, Dayton 1% in the high pass.
-Polk RDO-194 tweeters
-SpeakOn 12 ga interconnect cable
-upgraded binding posts
-Loctite applied to drivers
-New Armacell driver gaskets
-Dynamated drivers
-Hurricane nuts installed

$700 obo

vekjrxzdj637.jpg

b5it4v3k0v5y.jpg
vwepoinchima.jpg

Oppo BDP-103 firmware update

$
0
0
Released: 23 Jan 2017
Version: BDP10X-83-1226

FYI

Buckingham/McVie?

$
0
0
Heard these two had an album in the works due out about May...Anyone heard any cuts?..could be interesting...

Bi-amping rti A5's?

$
0
0
I have Denon AVR-X2300W that has discrete amps per channel and bi-amp capability with crossover setting ability. I also have a Polk Audio PSW350 subwoofer. I want to bi-amp a set of rti a5's. What should I set the crossovers to? 120hz for midrange speakers and 250hz (highest crossover value allowed) for the tweeters?

My 2.3 TL rebuild (and so the journey begins)

$
0
0
I finally got my set of dream speakers about 2 years ago, the 2.3 TL's for $700. The speakers were in great shape both cosmetically and mechanically , about an 8 or 9 out of 10. About 30 years ago I remember looking at the larger Polks (1.2 and 2.3's), I was dreaming and drooling, but they were well out of my price range. So I settled for a set of 2A's for $855, which was still a lot of money, and they served me well till I replaced them with the 2.3 TL's Anyway I started the upgrades to the 2.3 TL's this week, which will include Larry's rings, Black Hole 5, Dynamat Extreme, Armacel, and Loctite Powergrab.

First was to Powergrab the speaker magnets and caulk any seams inside the speaker cabinet. I found the 6 oz tube at Home Depot was better than the cartridge and caulk gun for fitting inside the speaker cabinets

Magnets firmly secured
x7v8u53xpxok.jpg

All inside seams sealed
y7cqcd61xlkr.jpg

While inside I found one of the braces unglued from the back wall. Powergrab to the rescue
49zeemqwr3af.jpg




Mounting amp to sub ok??

$
0
0
I helping my son add a 10 inch sub to his system. Can the sub amp be mounted to the sub box? It would be helpful for when he needs the truck space and the sub needs to come out for short time periods.

Looking for Misc Audio Deals of the Day? Updated info here!

$
0
0

time for more Joule Electra

$
0
0
Going to give this a try with the La300-mea8box3dvmvvk.jpg

It could be a very nice match. It should be interesting anyway....

I need a really cheap center

$
0
0
Worthy of a garage system. I am using my dumpster (bose 141s and a cheap Pioneer AVR) system for music and movies but I need a center because it is driving me nuts. Anyway it will be a 3.1 system one day with Polk monitor IIs. Long ang short of it, does any have an ol polk center to sell me cheap give me find me etc?

Post a picture... any picture

$
0
0
"Feeding me rice again, I'll get ya ya little brat."

Karma: Led Zeppelin Physical Graffiti lp

$
0
0
So my Uncle gave me two big plastic tubs of his and my aunt's old vinyl. In that was this Physical Graffiti album. It's the first release and its in good condition, I've ultrasonically cleaned it as well. I checked the issue serial number and this thing is only worth a bundle if it's still sealed.
Since it's roughly worth the same amount as a new pressing (which I own), I'm going to give it away. It's totally free (if you live in the continental US) for the person who can guess the right number that's between 1 and 20.
tfoa3v21tczd.jpg


Behringer U-Phoria UMC22 USB Audio Interface For Sale!

$
0
0
Have a mint condition Behringer U-Phoria UMC22 USB Audio Interface for sale. It has been used in my desktop setup. Have the original box. Asking ONLY $25 shipped within the CONUS areas! If interested, then please send me a PM. Thanks!

Cheers,

Phil

i9eyxwj0sz11.jpg

mifefr33nmrk.jpg

disehrge6pxz.jpg

ay43skr8kdk8.jpg

8dszq9enaocs.jpg




Center channel help

$
0
0
I currently am running a cs250-s and it's doing ok..... I have a couple options in front of me reasonably. A cs10 or a cs400..... any thoughts would be appreciated.

Rta11tl crossover rebuild

$
0
0
Hello everyone,

It's been awhile since I posted on here. I just recently purchased a pair of rta11tl and had a question on a capacitor value. I am hoping on ordering everything from Madisound to keep shipping costs down.

I am planning the following

For high pass
2 x 8.2mf 250v clarity caps PX to make the 16.4 value
2 x 12mf 250v clarity caps PX

For the low pass the original is a 34mf. Now everyone seems to substitute a 33mf for this. Could I go up to a 35mf since it's within the 10% range? I can get a Solen 35mf from
Madisound in that value.

For resistors I am planning on Mundrof MR10 1.5 MOX.

Other plans are to add dampening to the speaker and pr baskets. For now I am keeping the original tweeters. They sound real good to my ears as is.

Thank you

2.1 or 3.1

$
0
0
I have a 2.1 setup currently for my main living room tv.

Polk T15 bookshelf
Polk PSW108 sub
Pioneer VSX524K receiver

I know setting up rear speakers is going to be a challenge with what I call "wife acceptance factor" so I have ruled those out.

My question is will adding a center channel be worth it?

Right now my receiver is downmixing to stereo and I'm not sure if downmixing to 3.1 will be an option or if I will be missing sounds. Just looking for advice.

If I did get a center channel I will probably stick with the T series center.

Thanks in advance!

A Bluefox kinda Friday night...

$
0
0
Tis Friday night, I've gotten into the beer, system cranked up around 75ish, sounds mighty fine, this could be a weekly thing if it sounds and feels this darn great!

Anyone else partaking in the soothing sounds of their systems and chosen libation?
Viewing all 44559 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>